China Tubo de polietileno fita anti-corrosão envoltório fita tubular para encanamento de aço Fabricantes

todas as categorias

novos produtos

Página inicial > Lista de Produto > Revestimento De Tubulação De Borracha Butílica > Fita anti-corrosão > Tubo de polietileno fita anti-corrosão envoltório fita tubular para encanamento de aço

Tubo de polietileno fita anti-corrosão envoltório fita tubular para encanamento de aço

Descrição do produto

Tubo de polietileno fita anti-corrosão fita para tubo de aço \ n \ n Descrição do produto \ n \ n I. Descrição: \ n Fita adesiva anti-corrosão é um sistema de revestimento de fita aplicado a frio para proteção contra corrosão de petróleo, gás, petroquímico e Substratos subterrâneos ou aéreos de águas residuais. \ N A Fita anticorrosiva de tubo deve ser aplicada após o primer e antes da fita de camada externa à mão ou com uma \ na \ na \ n \ n II.Structure \ n A especificação do Pipe Anti Fita de corrosão constituída por duas camadas, camada adesiva e película de apoio \ n Adesivo: borracha butílica \ n Camada exterior: Mistura especial de polietileno estabilizado \ n \ n III. Características \ n Excelente aderência ao tubo e ao próprio \ n Pode ser aplicado sobre uma ampla faixa de temperatura \ n Boa conformabilidade e espessura uniforme consistente \ n Fácil aplicação sem equipamento especial \ n Compatível com revestimentos de tubos comuns \ n Excelente resistência a descolamento catódico \ n Atende ASTM D 1000, EN 12068, AWWA C214, C209 e outros padrão internacional \ n C antigo aplicado \ n \ n \ n IV. Propriedades físicas: \ n Fita anti-corrosão do tubo \ n \ n

Type	T-150	T-165	T-180
Total thickness (mm)	0.51	0.65	0.75
Polyethylene Film (mm)	0.31	0.37	0.41
Synthetic Adhesive (mm)	0.20	0.28	0.34
Elongation	≥400%
Tensile Strength (N/cm)	55	60	63
Peel Adhesion to Primed Pipe (N/cm)	25	30	33
Dielectric Strength(KV)	35	45.8	48
Cathodic Disbondment	0.24 in radius 6.4 mm
Volume Resistivity	2.5×10¹²ohm.m
Water Vapor Transmission Rate	≤0.1gm/m²/24h
Water Absorption Rate	<0.06%
Application Temperature	-10°c to 60°c
Max Serve Temperature	-40°c to 80°c
Color	Black
Available Roll Size (width×length)	2” to 36” ×50 to 900mm
Available Roll Length	10-300m

\ n Produtos de venda quentes


Pipeline Anti-corrosion Tape	Mechanical Protection Tape

Polyethylene Bitumen Tape	Viscoelastic Tape

\ n \ n

\ n

\ n \ n

1.Brand : XUNDA brand 2.Material: Polydethyelne and butyl rubber 3. Thickness: 15 mils to 40 mils 4. Width: 50 mm to 1000 mm 5.Length:10 m to 1800 meter 6.Main Customer:BGSL,SSGC,NIGC and so on 7.Industry Experience: more than 13 years 8.Biggest manufacture in China 9.proportion of exportation:more than 67% 10. Production ability: 10-15 ton per day 11.Accept OEM

1.Brand : XUNDA brand

2.Material: Polydethyelne and butyl rubber

3. Thickness: 15 mils to 40 mils

4. Width: 50 mm to 1000 mm

5.Length:10 m to 1800 meter

6.Main Customer:BGSL,SSGC,NIGC and so on

7.Industry Experience: more than 13 years

8.Biggest manufacture in China

9.proportion of exportation:more than 67%

10. Production ability: 10-15 ton per day

11.Accept OEM

\ n \ n \ n \ n

Description	Polyethylene butyl Pipe Wrap tape is a synthetic rubber-based material extruded into a soft permanently elastic strip, available in a roll form. The tape possesses high levels of surface tack and performs at a wide range of temperatures -T100 Inner layer wrap tape -T200 outer layer wrapping tape -T300 joint wrap tape
Usage	l Special for Oil ,Gas ,Water pipeline outer space corrosion prevent l Repair of damaged factory applied corrosion protection and anticorrosion to pipe surface l Outlining weld beads and cut backs prior to wrapping bare-welded joints. l Outlining seams on spiral and seam welded pipe.
Features & Benefits	l Excellent adhesion to a wide range of industries, steel piping. l Effortlessly applied with no special equipment (mouldable by hand). l Compatible with common pipe coatings l Endures extremes of heat and cold. l Excellent resistance to cathodic disbondment. l High water and vapour impermeability. l Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068
Main market	Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Bengal,Pakistan, Uzbekistan,India,Australia,Indonesia,Kazakhstan, Ecuador,Venezuela,Bolivia,Argentina, Uruguay,Malaysia and so on.
Material:	Butyl rubber adhesive , bitumen/asphalt
Material:	PE,PVC, ALUMINUM backing film

\ n

\ n \ n

\ n \ n \ n \ n

\ n \ n

1 Rust Removal Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free. 2 Priming Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m². 3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

1 Rust Removal

Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel

Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.

2 Priming

Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed

completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape

(it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².

3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping

The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs,

and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length

between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total

length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

\ n

\ n \ n \ n \ n \ n \ n \ n

\ n \ n

\ n \ n \ n

Payment:	T/T , L/C,Western Union,Money Gram,Cash
MOQ:	300 rolls
Shipment port	Qingdao or Shanghai port
Package:	12 rolls/carton ,6 rolls/carton ,4 rolls/carton ,depend on your order size
	20 inch container could load about 16 Tons 40 inch container could load about 23 Tons
Sample leading time:	about 2 days in the free season,may be 4 days in the busy season.
Delivery time:	10 days after the order confirmed,and it depends on the quantity of the order.
Brands:	OEM or ODM, we can provide as your requirements, including your design/size/material/weight/Logo/package and so on.
Ordering Information	Tape Coatings are available in roll form.Ordering Example: T100-20 WHT6X100FT 3’’

\ n \ n \ n \ n \ n

1.Experience QC department.
2.Top one-stop after-sale service.
3.Advance automatic imported machines
4.Outstanding and professional team
5. The most competitive price
6.Custom-design according to your favour.

1.Experience QC department.

2.Top one-stop after-sale service.

3.Advance automatic imported machines

4.Outstanding and professional team

5. The most competitive price

6.Custom-design according to your favour.

\ n \ n Contato